Přihlásit
Fakultní novinky
  • Zápis do prvních ročníků bakalářského a navazujícího studia
  • Uzavření studijního oddělení v pondělí 19.8.2019
  • Zápis do vyšších ročníků akademického roku 2019/2020

Přehled všech novinek

Fakulta textilní KDE Fakulta tetilní KHT Fakulta textilní KMI Fakulta textilní KNT Fakulta textilní KOD Fakulta textilní KTT

Publikace | Ft.Tul.cz

2018

  1. KOMÁRKOVÁ, P., aj. Wrinkle free plaited knitted fabrics without pre-heat setting. Journal of the Textile Institute. Taylor & Francis, 2018, roč. 109, č. 3. S. 307 – 311. ISSN 0040-5000.
  2. JARIYAPUNYA, N., B. MUSILOVÁ a A. HAVELKA. Prediction of Pattern Dimensions for Pressure Garment. Structure and Structural Mechanics of Textiles. Liberec, Czech Republic: TU Liberec, 2018. S. 287 – 293. ISBN 978-80-7494-430-7.
  3. NAEEM, M. S., aj. Adsorption Kinetics of Acid Red on Activated Carbon Web Prepared from Acrylic Fibrous Waste. Fibers and Polymers. Springer, The Korean Fiber Society, 2018, roč. 19, č. 1. S. 71 – 81. ISSN 1229-9197.
  4. NAEEM, J., aj. ANALYSIS OF THERMAL PROPERTIES, WATER VAPOR RESISTANCE AND RADIANT HEAT TRANSMISSION THROUGH DIFFERENT COMBINATIONS OF FIREFIGHTER PROTECTIVE CLOTHING. Industria Textila. Bucharest:, 2018, roč. 69, č. 6. S. on. ISSN 1222-5347.
  5. MUSADDAQ, A., aj. Comfort properties of nano-filament polyester fabrics: sensory evaluation. Industria Textila. , 2018, roč. 69, č. 1. S. 3 – 10. ISSN 1222-5347.
  6. NAEEM, J., aj. Comparison of Thermal Performance of Firefi ghter Protective Clothing at Diff erent Levels of Radiant Heat Flux Density. Tekstilec. slov:, 2018, roč. 61, č. 3. S. 179 – 191. ISSN 2350-3696.
  7. SIDDIQUE, H. F., aj. DEVELOPMENT OF V-SHAPED COMPRESSION SOCKS ON CONVENTIONAL SOCKS KNITTING MACHINE. Autex Research Journal. poland:, 2018Stránky neuvedeny (8 stránek). ISSN 2300-929.
  8. SIDDIQUE, H. F., A. A. MAZARI a A. HAVELKA. Effect of elastane linear density on compression pressure of V-shaped compression socks. Industria Textila. Bucharest:, 2018Stránky neuvedeny (10 stránek). ISSN 122-5347.
  9. SIDDIQUE, H. F., A. A. MAZARI, A. HAVELKA a S. HUSSAIN. EFFECT OF ELASTIC ELONGATION ON COMPRESSION PRESSURE AND AIR-PERMEATION OF COMPRESSION SOCKS. Fibres and textiles (Vlákna a textil). , 2018, roč. 25, č. 1. Stránky neuvedeny (9 stránek). ISSN 1335-0617.
  10. NAEEM, J., F. BUYUK MAZARI, A. A. MAZARI a L. VOLESKÝ. Effect of nano silver coating on thermal protective performance of firefighter protective clothing. The Journal of The Textile Institute. england:, 2018, roč. 16, č. 12. S. on. ISSN 1754-2340.
  11. SIDDIQUE, H. F., L. HES, Z. S. SKENDERI a S. HUSSAIN. Effect of preheat setting process on heat, mass and air transfer in plain socks. The Journal of The Textile Institute. United Kingdom:, 2018Stránky neuvedeny (12 stránek). ISSN 17542340.
  12. AHMAD, Z., S. IQBAL, A. A. MAZARI a M. ELDEEB. Effect of yarn structure on cover factor in woven fabrics. Industria Textila. Inst. Nat. Cercetare-Dezvoltare Text. Pielarie, 2018S. 197 – 201. ISSN 1222-5347.
  13. MUSADDAQ, A., aj. Influence of Weave Design and Yarn Types on Mechanical and Surface Properties of Woven Fabric. Fibres and Textiles in Eastern Europe. 1. vyd., 2018, roč. 26, č. 1. S. 42 – 45. ISSN 1230-3666.
  14. NAGY, L. Low-stress mechanical property study of various functional fabrics for tactile property evaluation. Materials. , 2018, roč. 11, č. 12. Stránky neuvedeny (13 stránek). ISSN 1996-1944.
  15. MAZARI, A. A., J. NAEEM, Z. KŮS a E. AKCAGUN. SIO2 aerogels and its application in firefighter protective clothing. Industria Textila. Romania: National Council of the Scientific Research from the Higher Education, 2018, roč. 69, č. 1. S. 50 – 54. ISSN 12225347.
  16. NAGY, L., M. KOLDINSKÁ, A. HAVELKA a S. JANDOVÁ. The methodology for evaluation and predicting of clothing comfort for functional apparel. Industria Textila. Bucharest: INST NATL CERCETARE-DEZVOLTARE TEXTILE PIELARIE-BUCURESTI, 2018, roč. 69, č. nr. 3. S. 206 – 211. ISSN 1222-5347.
  17. MAZARI, A. A., A. E. MANGAT, L. HES a V. BAJZÍK. THERMAL ABSORPTIVITY MODEL OF KNITTED RIB FABRIC AND ITS EXPERIMENTAL VERIFICATION. Autex Research Journal. Walter de Gruyter GmbH, 2018, roč. 18, č. 1. S. 20 – 27. ISSN 1470-9589.
  18. NAGY, L., A. HAVELKA, M. TICHÝ a R. SOUKUP. Application of Hybrid Heating Textile Structures in Clothing for Seniors. Fibres and textiles (Vlákna a textil). Bratislava: Institute of Natural and Synthetic Polymers Faculty of Chemical and Food Technology Slovak University of Technology in Bratislava, 2018S. 26 – 30. ISSN 1335-0617.
  19. KEJZLAR, P., Z. KŮS, J. NAEEM a A. A. MAZARI. Comparative Study of Radiant Heat Flux Density Transmission Through Firefighter Protective Clothing. Vlákna a textil. 1. vyd. Bratislava: Slovak University of Technology in Bratislava, 2018, roč. 25, č. 2. S. 79 – 86. ISSN 1335-0617.
  20. NAEEM, J., A. A. MAZARI, Z. KŮS a P. KEJZLAR. Comparative Study of Radiant Heat Flux Density Transmission Through Firefighter Protective Clothing. Fibres and textiles (Vlákna a textil). 1. vyd., 2018, roč. 25, č. 2. S. 79 – 86. ISSN 1335-0617.
  21. NAGY, L., A. HAVELKA a A. A. MAZARI. Medical Textile Equipments for Class One with a Non-invasive Character. Fibres and textiles (Vlákna a textil). Bratislava: Institute of Natural and Synthetic Polymers Faculty of Chemical and Food Technology Slovak University of Technology in Bratislava, 2018S. 20 – 25. ISSN 1335-0617.
  22. JARIYAPUNYA, N. a B. MUSILOVÁ. Predictive modelling of compression garments for elastic fabric and the effects of pressure sensor thickness. The Journal of The Textile Institute. UK: Taylor & Francis, 2018, roč. on, č. November. S. 1 – 9. ISSN 00405000.
  23. MUSILOVÁ, B. a R. NEMČOKOVÁ. Study of Czech Male Body Dimension And Evaluation of Men's Trousers Patternmaking Methods. Fibres and textiles (Vlákna a textil). Bratislava: Slovak University of Technology in Bratislava, 2018, roč. 25, č. 2. S. 74 – 78. ISSN 1335-0617.
  24. KOMÁRKOVÁ, P., aj. Wrinkle free plaited knitted fabrics without pre-heat setting. Journal of the Textile Institute. Taylor & Francis, 2018, roč. 109, č. 3. S. 307 – 311. ISSN 0040-5000.

 

2017

  1. JARIYAPUNYA, N. a S. S. BAHETI. Application of Image Analysis Method for Measurement of Fabric Stretch Deformation. 17th World Textile Conference: Shaping the Future of Textiles, AUTEX 2017. Greece: Institute of Physics Publishing, 2017. Stránky neuvedeny (6 stránek). ISSN 1757-8981.
  2. KOMÁRKOVÁ, P., V. GLOMBÍKOVÁ a A. HAVELKA. Heat and Moisture transport of socks. IOP Conference Series: Materials Science and Engineering. Institute of Physics Publishing, 2017. Stránky neuvedeny (6 stránek). ISSN 1757-8981.
  3. MUSILOVÁ, B., R. NEMČOKOVÁ a M. SVOBODA. Testing methods of pressure distribution of bra cups on breasts soft tissue. IOP Conference Series: Materials Science and Engineering. Institute of Physics Publishing, 2017. Stránky neuvedeny (5 stránek). ISSN 1757-8981.
  4. HAVELKA, A., aj. Plošná textilie ve formě pleteniny, zejména pro ošacení vytvořená ze směsových přízí [užitný vzor]. Zapsán dne 22. 12. 2017 pod číslem 31333.
  5. WIENER, J. a A. HAVELKA. Plošná textilie, tkanina nebo pletenina zejména pro potahy automobilových sedaček [užitný vzor]. Zapsán dne 20. 12. 2017 pod číslem 31331.
  6. MAZARI, A. A., E. AKCAGUN, N. CEVIZ a A. YILMAZ. Analyzing the effects of special washing processes on characteristics of sewing threads. Journal of the Textile Institute. , 2017, roč. 108, č. 11. S. 1926 – 1932. ISSN 0040-5000.
  7. IQBAL, S., M. A. S. M. EL DEEB, Z. AHMAD a A. A. MAZARI. COMPARATIVE STUDY ON VISCOSE YARN AND KNITTED FABRIC MADE FROM OPEN END AND RIETER AIRJET SPINNING SYSTEM. Tekstil ve Konfeksiyon. Ege Universitesi, 2017, roč. 27, č. 3. S. 234 – 240. ISSN 1300-3356.
  8. BUYUK MAZARI, F., A. A. MAZARI, A. HAVELKA a J. WIENER. Effect of a superabsorbent for the improvement of car seat thermal comfort. Fibres and Textiles in Eastern Europe. 1. vyd. Poland: Institute of Biopolymers and Chemical Fibres, 2017, roč. 25, č. 2. S. 83 – 87. ISSN 1230-3666.
  9. MAZARI, A. A., E. AKCAGUN, O. C. NURAY a A. YILMAZ. INVESTIGATING THE THERMAL COMFORT PROPERTIES OF MEN’S JACKET AS SINGLE AND MULTIPLE LAYERED MATERIAL. Industria Textila. , 2017, roč. 68, č. 6. S. 458 – 463. ISSN 1222-5347.
  10. ANCUTIENE, K., M. KOLDINSKÁ a A. HAVELKA. Investigation of tensile resilience properties of stretch denim fabrics. Indian Journal of Fibre and Textile Research. , 2017, roč. 42, č. 2. S. 175 – 182. ISSN 0971-0426.
  11. BUYUK MAZARI, F., aj. Model of thermal absorptivity of knitted rib in dry state and its experimental authentication. Industria Textila. BUCURESTI: INST NATL CERCETARE-DEZVOLTARE TEXTILE PIELARIE-BUCURESTI, 2017, roč. 68, č. 4. S. 263 – 268. ISSN 1222-5347.
  12. NAEEM, J., A. A. MAZARI a A. HAVELKA. Review: Radiation heat transfer through fire fighter protective clothing. Fibres and Textiles in Eastern Europe. , 2017, roč. 25, č. 4. S. 65 – 74. ISSN 1230-3666.
  13. KOVALOVA, N., P. KULHAVÝ, J. VOSÁHLO a A. HAVELKA. Experimental Investigation of Multiaxial Stress of the Sewing Seam and Creating its numerical model. Fibres and textiles (Vlákna a textil). 1. vyd. Bratislava: Slovenská technická univerzita v Bratislave, 2017, roč. 24, č. 2. S. 49 – 53. ISSN 1335-0617.
  14. BAHETI, S. S., N. JARIYAPUNYA a M. TUNÁK. Image Analysis for Characterizing Tensile Deformation of Knitted Fabric. Fibres and textiles (Vlákna a textil). Bratislava, Slovakia: Slovak University of Technology in Bratislava, 2017, roč. 24, č. 2. S. 54 – 58. ISSN 1335-0617.
  15. ŠVECOVÁ, J., A. HAVELKA a L. NAGY. MEASUREMENT OF PHYSIOLOGICAL PROPERTIES OF MILITARY CLOTHING IN SIMULATION OF CLIMATIC CONDITIONS IN SELECTED AREAS OF THE WORLD. Fibres and textiles (Vlákna a textil). , 2017, roč. 24, č. 4. S. 3 – 8. ISSN 1335-0617.
  16. MUSADDAQ, A., A. BOUGHATTAS, J. WIENER a A. HAVELKA. MECHANISM OF LIQUID WATER TRANSPORT IN FABRICS; A REVIEW. Fibres and textiles (Vlákna a textil). , 2017, roč. 24, č. 4. S. 58 – 65. ISSN 1335-0617.
  17. HUSSAIN, S., aj. Moisture transport phenomena of functional underwears. Fibres and textiles (Vlákna a textil). Bratislava: Slovak University of Technology, 2017, roč. 24, č. 2. S. 59 – 66. ISSN 1335-0617.
  18. JARIYAPUNYA, N., B. MUSILOVÁ, J. GERŠAK a S. S. BAHETI. THE INFLUENCE OF STRETCH FABRIC MECHANICAL PROPERTIES ON CLOTHING PRESSURE. Fibres and textiles (Vlákna a textil). Slovak University of Technology in Bratislava, 2017, roč. 24, č. 2. S. 43 – 48. ISSN 1335-0617.
  19. HAVELKA, A., V. GLOMBÍKOVÁ, P. KOMÁRKOVÁ a M. CHOTĚBOR. The study of fabric performance for car seats. Tekstilec. 1. vyd. LJUBLJANA, SLOVENIA: University of Ljubljana, 2017, roč. 60, č. 3. S. 235 – 242. ISSN 0351-3386.
  20. KOLÍNOVÁ, M., M. SYROVÁTKOVÁ, P. KOMÁRKOVÁ a R. TŘEŠŇÁK. The thermal and porous properties of protective rubber boots. Fibres and textiles (Vlákna a textil). Bratislava: Faculty of Chemical and Food Technology, 2017, roč. 24, č. 4. S. 15 – 21. ISSN 1335-0617.
  21. KOMÁRKOVÁ, P., aj. Wrinkle free plaited knitted fabrics without pre-heat setting. Journal of the Textile Institute. Taylor & Francis, 2018, roč. 109, č. 3. S. 307 – 311. ISSN 0040-5000.

 

2016

  1. BUYUK MAZARI, F., A. A. MAZARI, A. HAVELKA a J. WIENER. IMPROVEMENT OF CAR SEAT’S THERMAL COMFORT. Autex conference 16. 1. vyd. slovenia:, 2016. Stránky neuvedeny (4 stránky). ISBN 978-961-6900-17-1.
  2. KOVALOVA, N., P. KULHAVÝ, J. VOSÁHLO a A. HAVELKA. Numerical Model And Analysis of Multiaxial Stress on the Sewing Seam. 16th AUTEX World Textile Conference 2016. 0. vyd. Ljubljana: University of Ljubljana, Faculty of Sciences and Engineering, Department of Textiles, Graphic Arts and Design, 2016. Stránky neuvedeny (8 stránek). ISBN 978-961-6900-17-1.
  3. KULHAVÝ, P., N. KOVALOVA a J. VOSÁHLO. Numerical Model of the Static Loading of a Stitched Seam in the Composite Cover of Car Seat. Applied Mechanics and Materials. 1. vyd. Švýcarsko: 2016 Trans Tech Publications Inc., Switzerland, 2016. S. 137 – 140. ISSN 1662-7482.
  4. VESELÁ, D. a Z. KŮS. Device for measurement of static and dynamic air permeability and deformation changes in textile materials. Fibers and Textiles in Eastern Europe. 1. vyd. Technical University of Lodz, Lodz, Poland: Institute of Biopolymers and Chemical Fibres, 2016, roč. 24, č. 1. S. 120 – 126. ISSN 1230-3666.
  5. MAZARI, A. A., aj. Effect of Perforated Polyurethane Foam on Moisture Permeability for Car Seat Comfort. Fibres and Textiles in Eastern Europe. 1. vyd. Poland:, 2016, roč. 24, č. 6. S. 165 – 169. ISSN 1230-3666.
  6. KEJZLAR, P., A. A. MAZARI, F. BUYUK MAZARI a E. AKCAGUN. Effect of Sewing Speed on the Physical Properties of Firefighter Sewing Threads. Industria Textila. 1. vyd. Bucuresti: Editura Certex, 2016, roč. 67, č. 5. S. 333 – 337. ISSN 1222-5347.
  7. MAZARI, A. A., A. HAVELKA a K. BAL. Prediction of needle heating in an industrial sewing machine. Textile Research Journal. 1. vyd. England:, 2016, roč. 86, č. 3. S. 302 – 310. ISSN 0040-5175.
  8. NEJEDLÁ, M. . CAM systems for clothing production and transfer of data from CAD system. Vlakna a textil. 1. vyd. Slovak University of Technology in Bratislava: Slovak University of Technology in Bratislava, 2016, roč. 23, č. 2. S. 23 – 30. ISSN 1335-0617.
  9. MAZARI, A. A., E. AKCAGUN, A. HAVELKA a I. KHAN. Effect of sewing speed on the physical properties of the firefighter sewing threads. Industria Textila. 1. vyd. Ljubljana, Slovenia:, 2016, roč. 67, č. 5. S. 333 – 337. ISBN 978-961-6900-17-1, ISSN 1222-5347.
  10. NEJEDLÁ, M. . a R. MINAŘÍK. Examination of sleep disturbances using the ALICE6 system. Vlakna a textil. 1. vyd. Bratislava, Slovakia: Slovak University of Technology in Bratislava, 2016, roč. 23, č. 1. S. 9 – 17. ISSN 1335-0617.
  11. KOLÍNOVÁ, M. a M. KOLDINSKÁ. Objektivní hodnocení omaku funkčních pletenin. Vlakna a textil. 1. vyd. Bratislava:, 2016, roč. 23, č. March. S. 24 – 31. ISSN 1335-0617.
  12. HAVELKA, A., L. NAGY a Z. KŮS. Possibilities of Testing And Evaluation of Funcional Membrane Textiles. Fibres and textiles (Vlákna a textil). 0. vyd. Bratislava: FOART, s.r.o., Bratislava, 2016, roč. 23, č. 4. S. 42 – 46. ISSN 1335-0617.
  13. MAZARI, A. A., F. BUYUK MAZARI a J. NAEEM. Review: Instruments used for testing moisture permeability. Fibres and textiles (Vlákna a textil). 0. vyd., 2016, roč. 23, č. 1. S. 42 – 48. ISSN 1335-0617.
  14. NEJEDLÁ, M. . Somatometry and comfort of clothing or handicapped persons. Vlakna a textil. 1. vyd. Slovak University of Technology in Bratislava: Slovak University of Technology, 2016, roč. 23, č. 4. S. 15 – 20. ISSN 1335-0617.

 

2015

  1. BÜYÜK MAZARI F., KREMENAKOVA D., MAZARI A., HUANG J. Effect of UV-weathering on flex fatigue of plastic optical fiber, 2015, 66(4), Industria Textila, pp 171-175 (WOS)
  2. Funda büyük mazari, Asif elahi mangat, vladimir bajzik, lubos hes. The use of artificial neural networks to estimate thermal resistance of knitted fabrics, volume: 25 issue: 4 / october - november 2015. (WOS)
  3. Havelka, A., Glombiková, V., Mazari, F.B. Monitoring thermophysiological comfort in the interlayer between driver and the carseat, Vlakna a Textil, 2015 (3-4), pp. 40-45, ISSN 13350617 (Scopus)
  4. Havelka, A., Glombikova, V., Kus, Z., Chotebor, M. The thermal insulation properties of high-tech sportswear fillings, International Journal of Clothing Science and Technology, 2015, 27 (4), pp. 549-560 (Scopus)
  5. Mazari, A., Bal, K., Havelka, A., Temperature distribution on sewing needle at high speed industrial sewing lockstitch machine,Vlakna  a Textil, 2015 (1), pp. 37-39. (Scopus)
  6. Mazari, A., Havelka, A., Wiener, J. and Zbigniew, R.  A study on DLC-coated industrial lockstitch sewing needle. Industria Textila, 2015, 66(1), 43-47. (WOS)
  7. Mazari, A., Havelka, A., Kus, Z. The effects of Lubricant amount on sewing needle temperature and tensile properties of Polyester-polyester core-spun thread. Industria Textila, 2015, 66(2), 97-102. (WOS)
  8. Mazari, A., Bal, K. and Havelka A. Prediction of needle heating in an industrial sewing machine. Textile Research Journal, DOI:10.1177/0040517515586160,  2015.(WOS)
  9. Mazari, F.B., Havelka, A., Document Pressure distribution of car seat at different angle of backrest. Vlakna a Textil 2015 (3-4), pp. 33-39 (Scopus)
  10. Nejedlá, M., Pikalová, I. Ergonomics in Catia 3D cad system and its utilization in clothing industry, Vlakna a Textil, 2015 (2), pp. 3-10 (Scopus)
  11. Nejedlá, M. Ergonomics and anthropometry or how to live everyday life with a handicap, Vlakna a Textil, 2015(3-4), pp. 3-11 (Scopus)
  12. Nemcokova, R., Glombikova, V., Komarkova, P. Study on Liquid Moisture Transport of Knitted Fabrics by Means of Mmt, Thermography and Microtomography Systems. Autex Research Journal. Volume 15, Issue 4, Pages 233–242, ISSN (Online) 2300-0929, December 2015 (Scopus)
  13. Lizák, P., Havelka, A., Drobný, M., Mojumdar, S.C., The effect of sublimation print on thermal conductivity of layered sports textiles, Journal of Thermal Analysis and Calorimetry, February 2015, 119 (2), pp. 891-897 (Scopus)
  14. Mudzhikova, M., Mazari, A., Havelka, A., Mangat, A., Bajzik, V. Effect of sewing thread pretension on the seam for car seat leather cover stitching, Vakna Textil, Volume 2015, Issue 3-4, 1 January 2015, Pages 18-25. (Scopus)
  15. Juan Huang, Funda Buyuk Mazari, Dana Kremenakova, Jiri Militky, Strength distribution of PMMA-POF, Industria Textila, 265-268, 5, 2015 (WOS)
  16. KULHAVÝ, Petr, Natalia KOVALOVA a Josef VOSÁHLO. Methods of creating a numerical model of a real seam based on experimental data. EAN 2015 - 53rd Conference on Experimental Stress Analysis. Cesky Krumlov; Czech Republic, 2015: 195-202. (Scopus)

 

2014

  1. Glombikova, V., Kus, Z., Drape evaluation by the 3D drape scanner, Tekstil ve Konfeksiyon, 2014, Vol. 24 (3), pp. 243-249 (WoS)
  2. Glombikova, V., Komarkova, P., The efficiency of non-flammable functional underwear, AUTEX Research Journal, 2014, Vol. 14 (3), pp. 1-5 (WoS)
  3. Musilova, B., Nemčokova, R., Study of Czech male body proportions and evaluation of men´s shirt pattern making methods, Tekstil ve Konfeksiyon, 2014, Vol. 24 (WoS)
  4. Mazari A., Havelka A. and Hes L. Experimental techniques for measuring sewing needle temperature, Tekstil ve Konfesiyon, 2014,1, 111-118. (WoS + Scopus)
  5. Mazari, A. and Havelka, A. Sewing needle temperature of an Industrial lockstitch machine. Industria Textila, 2014, 65(6), 335-339. (WoS + Scopus)
  6. Nagy, L., Havelka, A., Jandová, S. & Kůs, Z., 2014. Physiological Comfort in Garments for Sport Activities and its Testing. Singapore, CRC press / Balkema
  7. Doczyova, K., Glombikova, V., Komarkova, P., Application of microtomography in textile metrology, Tekstilec, 2014, Vol. 57(1), pp. 4-11 (Scopus)
  8. Glombikova, V., Komarkova, P., Study on the impact of dye – sublimation printing on the effectiveness of underwear, Tekstilec, 2014, Vol. 57(2), pp. 133-138
  9. Nejedlá, M., Tatarkovičová, M.: Modulor System in Practice. Vlákna a textil, roč. 21, 2014, No. 1, pp. 9-20, ISSN 1335-0617.
  10. Nejedlá, M.: 2D and 3D Software for the Design of Clothing Products. Vlákna a textil, roč. 21, 2014, No. 2, pp. 12-23, ISSN 1335-0617.
  11. Nemcokova, R., Komarkova P.: Experimental Measurement of Liquid Moisture Transmission Through Textiles, Vlákna a textil, 2014, Vol. 4, pp. 39–47, ISSN 1335-0617
  12. Zelová, K. a Fridrichová, L. How We Can Use Multivariate Statistical Analysis to Predict Creasing of Fabrics. Applied Mechanics and Materials. 2014, 543-547
  13. Mazari, A. and Havelka, A. Impact of stitch length on sewing needle temperature. World Journal of Engineering, 2014, 11(2), 187-192.(Scopus)
  14. Naeem, M., Mazari, A. Effect of sewing speed on seam strength. Vlákna a textil, 2014, 2, 24-29.(Scopus)
  15. Mazari A., Havelka A. and Buyuk Mazari, F. Effect of DLC coated needle on sewing performance, Vlákna a textil, 2014, 3, 55-58.(Scopus)
  16. Mazari, A. and Havelka, A. Optimizing Lubricant Amount for Sewing Threads, In: Fiber Society, Liberec, May 2014.(Scopus)
  17. Bajzik, V., Bečicová, Z., Havelka, A., Vliv délky pracovního zatížení na poškození povrchu šicí jehly. Vlákna a textil, 2014, Vol. 3, pp. 4–7, ISSN 1335-0617
  18. Zhu, G., Kremenakova, D., Wang, Y., Militky, J., Mazari, F.B., An Analysis of Effective Thermal Conductivity of Heterogeneous Materials. Autex Research Journal. Volume 14, Issue 1, Pages 14–21, ISSN (Print) 1470-9589, DOI: 10.2478/v10304-012-0044-2, March 2014.